Welcome to ioiscsi.com
indexcompany infoproductssupportdriver/BIOS updatesDealersordersContact

Narrow SCSI Flat Cable

Connecting Internal Narrow SCSI Peripheral
Cable Part No. CB-003

IDC 50-pin Male 7x Flat Ribbon Internal Cable
( 93 cm; F43F10F10F10F10F10F )

The CB-003 cable is for Internal Narrow SCSI connection. This is IDC 50-pin Flat Ribbon Cable especially for external box and enough peripheral support to advanced user . If you need more peripheral for SCSI devices, You may be to add a 50-pin round cable for additional devices.

The following steps will guide you to connect your internal Narrow peripheral:

Step 1
Unpack and Locate the 50-pin Flat Ribbon Internal Cable in the package.

CB003 Image1

Step 2
Plug J1 connector (the long of the cable) to the Narrow connector on the SCSI Card .

CB003 Image2

Note :
1. J2~J6 with pull tab paper and J1, J7 with Strain Relief.

2. With the help of pull tab paper not only make it easier to pull out the cable from device but also protect the cable for longer life cycle.

Step 3
Plug the remaining connectors to your internal Narrow peripherals.

CB003 Image3

Application :
This CB-003 is a 50-pin standard Internal Flat Ribbon Cable. This cable is for use with any of Narrow SCSI Host Adapter with an IDC 50-pin Internal Male connector. This 93 cm, seven connector (The host adapter and six peripherals), it provides an easy solution for connecting internal SCSI peripheral.


Cable Index

Narrow SCSI Flat Cable

Wide Ultra SCSI Cable

Teflon Multi-Mode
Flat Cable

External Round Cable

LVD Twist'N'Flat Cable

LVD/SE Terminator


products | home