|
Wide Ultra SCSI Cable
Connecting Internal Wide Ultra SCSI Peripheral
Cable Part No. CB-013
Wide Ultra SCSI 68-pin Internal x3 and One external kit
(96 cm; M43M10M43F)
The CB-013 cable is for wide connection. It allows you to connect the SCSI host adapter with six internal type Wide SCSI peripheral . If you have more than six Wide peripherals, you will need to change another Wide cable with enough connectors to accommodate all of your Wide peripherals.
The following steps will guide you to connect your internal Wide peripheral:
Step 1
Unpack and Locate the Ultra Wide SCSI 68-pin Internal Flat Cable in the package.
?
Step 2
Plug J1 connector (the long of the cable) to the Wide connector on the SCSI Card
Note:
1. J1~J3 are with Strain Relief pull tab paper.
2. With the help of pull tab paper not only make it easier to pull out the cable from device but also protect the cable for longer life cycle.
Step 3
Plug the remaining connector (J2~J3) to your internal Ultra Wide SCSI peripheral and plub J4 connector to the external connector.
Application :
This CB-013 is a 68-pin Internal Wide Ribbon Flat cable. This cable is for use with any Ultra Wide Host Adapter with an 68-pin Wide Connection.? Recommended for Ultra Wide SCSI higher frequency? applications. This 96 cm, four-connector( one for the host adapter, two internal peripheral and one external connection for additional devices), It provides an easy solution for connecting internal Wide SCSI peripheral and Expansion for external Wide SCSI peripheral.
|
