Welcome to ioiscsi.com
indexinfoproductssupportdriver/BIOS updatesDealersOrdersContact

Wide Ultra SCSI Cable

Connecting Internal Wide Ultra SCSI Peripheral
Cable Part No. CB-015

Wide Ultra SCSI 68-pin Internal x9
( For External Box )
( 80 cm; M10M10M10M10M10M10M10M10M )

The CB-015 cable is for wide connection. It allows you to connect with internal type SCSI Expander and the SCSI peripheral with up to seven internal type Wide SCSI peripherals and one SCSI Terminator kit.

The following steps will guide you to connect your internal Wide peripheral:

Step 1
Unpack and Locate the Ultra Wide SCSI 68-pin Internal Flat Cable in the package.

?CB015 Image1

Step 2
Plug J1 connector to the SCSI Expander and J9 connector to SCSI Terminator.

CB015 Image2

1. J1~J9 are with Strain Relief pull tab paper.
2. With the help of pull tab paper not only make it easier to pull out the cable from device but also protect the cable for longer life cycle.

Step 3
Plug the remaining connectors to your internal Ultra Wide SCSI peripherals.

CB015 Image3

Application :
This CB-015 is a 68-pin Internal Wide Ribbon Flat cable. This cable is for use with any of Ultra Wide SCSI External enclosure with a 68-pin Wide Connection. Recommended for Ultra Wide SCSI higher frequency applications. This 80 cm, nine-connector( one for SCSI Expander, seven for internal peripheral and the last for Terminator), it provides an easy solution for connecting internal type SCSI expander with internal Wide SCSI peripheral.


Cable Index

Narrow SCSI Flat Cable

Wide Ultra SCSI Cable

Teflon Multi-Mode
Flat Cable

External Round Cable

LVD Twist'N'Flat Cable

LVD/SE Terminator

products | home