Welcome to ioiscsi.com
indexinfoproductssupportdriver/BIOS updatesdealersordersContact

Wide Ultra SCSI Cable

Connecting Internal Wide Ultra SCSI Peripheral
Cable Part No. CB-016

Wide Ultra SCSI 68-pin Internal x1 and One external kit
( 27 cm; M27M )

The CB-016 cable is for wide connection. It allows you to connect the SCSI host adapter with one external kit. It can connect with SCSI round cable for external box or other devices.

The following steps will guide you to connect your internal Wide peripheral:

Step 1
Unpack and Locate the Ultra Wide SCSI 68-pin Internal Flat Cable in the package.

?CB016 Image1

Step 2
Mounting J1 connector with bracket to the rear panel of the case.

CB016 Image2

1. Only J2 are with Strain Relief pull tab paper.
2. With the help of pull tab paper not only make it easier to pull out the cable from device but also protect the cable for longer life cycle.

Step 3
Plug J2 connector to the Wide connector on the SCSI Card.

CB016 Image3

Application :
This CB-016 is a 68-pin Wide Internal Ribbon Flat cable. This cable is for use with any of Wide Host Adapter with an 68-pin Wide Ultra Connection. Recommended for Ultra Wide SCSI higher frequency applications. This 27 cm, two-connector( one for the host adapter ,one external connection for additional devices), it provides an easy solution for connecting external SCSI peripheral.


Cable Index

Narrow SCSI Flat Cable

Wide Ultra SCSI Cable

Teflon Multi-Mode
Flat Cable

External Round Cable

LVD Twist'N'Flat Cable

LVD/SE Terminator

products | home