|
Wide Ultra SCSI Cable
Connecting Internal Wide Ultra SCSI Peripheral
Cable Part No. CB-017
Wide Ultra SCSI 68-pin Internal x 1 and Two external kit
( 54 cm; F27M27F )
The CB-017 cable is for wide connection. It allows you to connect the Internal type SCSI Expander with two external kits. You can connect the SCSI round cable and Terminator on the two external kit.
The following steps will guide you to connect your internal Wide peripheral:
Step 1
Unpack and Locate the Ultra Wide SCSI 68-pin Internal Flat Cable in the package.
 ?
Step 2
Mounting J1 and J3 connector with bracket to the rear panel of the case.
Note:
1. Only J2 are with Strain Relief pull tab paper.
2. With the help of pull tab paper not only make it easier to pull out the cable from device but also protect the cable for longer life cycle.
Step 3
Plug J2 connector to the Wide connector on the SCSI expander/converter.
Application :
This CB-017 is a 68-pin Wide Internal Ribbon Flat cable. This cable is for use with any of Wide SCSI enclosure with a 68-pin Wide Ultra Connection. Recommended for Ultra Wide SCSI higher frequency applications. This 54 cm, three-connector (one for the scsi expander/converter, two for external connection), it provides an easy solution for connecting external SCSI enclosure.
|
