Welcome to ioiscsi.com
indexinfoproductssupportdriver/BIOS updatesDealersordersContact

Wide Ultra SCSI Cable

Connecting Internal Wide Ultra SCSI Peripheral
Cable Part No. CB-011

Wide Ultra SCSI 68-pin Male x 5 Internal Flat Cable
( 73 cm; M43M10M10M10M )

The CB-011 cable is for wide connection . It allows you to connect the SCSI host adapter with two internal type Wide SCSI peripheral . If you have more than four Wide peripherals, you will need to change another Wide cable (CB-012 ) with enough connectors to accommodate all of your Wide peripherals.

The following steps will guide you to connect your internal Wide peripheral:

Step 1
Unpack and Locate the Wide SCSI Internal Flat Cable in the package.

CB011 Image1

Step 2
Plug J1 connector ( the long of the cable ) to the Wide connector on the SCSI Card.

CB011 Image2

1. J1~J5 are with Strain Relief pull tab paper.
2. With the help of pull tab paper not only make it easier to pull out the cable from device but also protect the cable for longer life cycle.

Step 3
Plug the remaining connectors to your internal Wide SCSI peripherals.

CB011 Image3

Application :
This CB-011 is a 68-pin Wide Internal Flat cable. This cable is for use with any Wide Host Adapter with an 68-pin Wide Connection. Recommended for Wide SCSI higher frequency applications. This 73 cm, five-connector( one for the host adapter and four peripheral ), it provides an easy solution for connecting internal SCSI peripheral.


Cable Index

Narrow SCSI Flat Cable

Wide Ultra SCSI Cable

Teflon Multi-Mode
Flat Cable

External Round Cable

LVD Twist'N'Flat Cable

LVD/SE Terminator

products | home