|
Wide Ultra SCSI Cable
Connecting Internal Wide Ultra SCSI Peripheral
Cable Part No. CB-010
Wide Ultra SCSI 68-pin Male x 3 Internal Flat Cable
( 53 cm; M43M10M )
The CB-010 cable is for wide connection. It allows you to connect the SCSI host adapter with two internal type Wide SCSI peripheral . If you have more than two Wide peripherals, you will need to change another Wide cable ( CB-011 and CB-012 ) with enough connectors to accommodate all of your Ultra Wide peripherals.
The following steps will guide you to connect your internal Wide peripheral:
Step 1
Unpack and Locate the Wide SCSI Internal Flat Cable in the package.
Step 2
Plug J1 connector (the long of the cable) to the Wide connector on the SCSI Card.
Note:
1. J1~J3 are with Strain Relief pull tab paper.
2. With the help of pull tab paper not only make it easier to pull out the cable from device but also protect the cable for longer life cycle.
Step 3
Plug the remaining connectors to your internal Wide SCSI peripherals.
Application :
This CB-010 is a 68-pin Wide Internal Flat cable. This cable is for use with any Wide Host Adapter with an 68-pin Wide Connection. Recommended for Wide SCSI higher frequency applications. This 53 cm, three-connector (one for the host adapter and two peripheral ), it provides an easy solution for connecting internal SCSI peripheral.
|
